Your ENVISION binoculars use magnetic sensors to determine their orientation and accurately position augmented reality information in your field of view.
If these sensors detect a magnetic disturbance, the message “Magnetic Interference” may appear.
What causes magnetic interference?
Magnetic interference can be caused by nearby objects containing magnets or generating magnetic fields, including:
- Smartphones, particularly iPhones with built-in magnets.
- Magnetic phone cases and accessories.
- Electronic devices containing magnets.
- Nearby metallic structures or equipment that may affect magnetic measurements.
Magnets are particularly disruptive to ENVISION's sensors.
For example, if you keep your iPhone in your pocket, lowering your binoculars to waist level when resting your arms may bring them close enough to the phone's internal magnets to trigger the warning.
This can happen even if no obvious source of interference is visible while you are observing.
What should I do if the warning appears?
- Move away from nearby magnetic objects and metallic structures.
- Keep your smartphone and magnetic accessories away from your binoculars, including when lowering them between observations.
- Wait a few seconds for the warning to disappear. The sensors may need a short time to recover after moving away from the source of interference.
- If the augmented reality information remains incorrectly positioned, perform a new calibration in an open area away from potential sources of interference.
Can magnetic interference affect augmented reality?
Yes. Magnetic interference can affect the accuracy of the binoculars' orientation sensors.
As a result, augmented reality information may appear incorrectly positioned or misaligned with the objects you are observing.
However, magnetic interference does not directly affect the optical magnification or the image seen through the binoculars.
Does this mean my binoculars are defective?
Not necessarily.
The “Magnetic Interference” warning is designed to alert you when environmental conditions may affect the accuracy of the augmented reality display.
In most cases, moving away from the source of interference and allowing the sensors a few seconds to recover should resolve the warning.
If the augmented reality display remains misaligned, recalibrating your binoculars may help restore accurate positioning.
Fanny
Updated :