Anna
Updated :
These are the different colors you can see on your telescope LED:
- Red or Blue (depending on your telescope's settings): the telescope is ON and ready to connect.
-
- Red or Blue blinking (depending on your telescope's settings): your telescope is in use, while performing Goto or stacking.
- cyan and blinking: the telescope is off and charging. It will blink from 6 times (fully discharged) to solid blue (fully charged).
- Yellow and blinking: the telescope is being updated.
- Green and blinking: the data upload is in progress.
- Green (for 1 minute): the data upload succeeded.
- Orange (for 1 minute): the data upload failed.
- Purple/magenta: the telescope embedded software is turning ON or OFF.
- Purple and blinking 5 times: telescope is OFF and doesn't have enough charge to turn ON. You need to charge it.
- White: an error happened. You should reboot your telescope.
Note: the white LED may have a slight blue tint and can appear as a very pale blue in some cases.
Note: If your LED remains purple or white regardless of your manipulations (you fully charged the unit, and rebooted it several times), please contact our support.